Surendra Babu B.

Surendra Babu B.

Professor, Mechanical Engineering, GST , VSP

Education
Ph. D.
Email ID
sbattula@gitam.edu
Education
Ph. D.
Office room coordinates
Bulding Name: Industrial Engineering Bhavan ,Floor NO: 3 floor, Room No: 305.
Consulting hours
8am-5pm
List of courses
MTECH

Education

Degree NameInstitute & College nameYear of Graduation/Award
Ph.D.AU College of Engineering2007
M.Tech.NIT Calicut1995
B.E.Manohar Bhai Institute of Technology1991

Elimination Of Leak With An Innovative Maintenance Technique On Closed Drain System In Process Industry By Creation Of New Design Concept And Safe ExecutionInternational Journal of Advanced Science and Technology, Scopus, MAY-Select, 29, 1111-1120

Improvement of Sewing Machine Design for Assembly Time Reduction Using DFA MethodologyInternational Journal of Advanced Science and Technology , Scopus, JUN-2020, 29, 7845-7857

CFD ANALYSIS OF EROSION MODELING IN PIPE BENDS OF CLOSED DRAIN SYSTEM USING ANSYS FLUENTJOURNAL OF CRITICAL REVIEWS, Scopus, JUN-2020, 7, 2771-2783

Prioritization of Maintenance Metric Factors and Improve the Supply Chain Performance through Cluster Analysis and ANOVAJour of Adv Research in Dynamical & Control Systems , Scopus, JUN-2020, 12, 2490-2497

REFLECTION ON SPATIAL VISUALIZATION FOR ENHANCED LEARNING A COMPREHENSIVE REVIEWInternational Journal of Mechanical and Production Engineering Research and Development (, Scopus, JUN-2020, 10, 1359-1370

EFFECT OF TRANSVERSE VIBRATIONS ON THE HARDNESS OF ALUMINUM 5052 H32 ALLOY WELDMENTSInternational Journal of Mechanical Engineering and Technology, Scopus, -2019, 10, 327-333

Process capability improvement through DMAIC for aluminum alloy wheel machiningJournal of Industrial Engineering International, Scopus, -2018, 14, 213-226

Effect of Hydrated MgAl silicate Ceramic Particle on Microstructure and Compressive Properties of Al6063 MMCMaterials Today Proceedings , Scopus, -2018, 5, 19424-19430

Microstructural Characterization of 6063 Aluminum Alloy Nanocomposites International Journal of Mechanical and Production Engineering Research and Development , Scopus, APR-2018, 8, 851-856

Efficacy of Nanocutting Fluids in Machining an Experimental InvestigationAdvances in Technology Innovation, Google scholar, -2018, 3, 78-85

Effect of Vibratory Tungsten Inert GasWelding on Tensile Strength of Aluminum5052H32 Alloy WeldmentsMaterials Focus, Google scholar, -2017, 6, 325-330

Vibration Effect on the Impact Strength of Al 5052H32 WeldmentsJournal of Mechanical Engineering Research and Developments, Scopus, -2017, 40, 311-316

The impact of training on organisation performance in manufacturing industryInternational Journal of Applied Research, Google scholar, -2017, 3, 752-758

Effect of Vibratory Weld Conditioning on Residual Stresses and Weld Joint Properties A ReviewJournal of Manufacturing Technology Research, Scopus, -2017, 8, 1-9

Process based tolerance assessment of connecting rod machining processJournal of Industrial Engineering International, Scopus, -2016, 12, 211-220

Quality Assurance through Process Improvement A Concise ReviewEngineering Journal, Scopus, -2016, 20, 103-114

PHASE HOLDUPS IN THREEPHASE FLUIDIZED BEDS WITH TWISTED TAPE INTERNAL Multiphase Science and Technology, Google scholar, -2016, 28, 53-70

Investigate the Influence of Mechanical Vibrations on the Hardness of Al5052 WeldmentsIndian Journal of Science and Technology, Google scholar, -2016, 9, 1-4

WalltoBed Mass Transfer in a Three Phase Fluidized Bed with Twisted Tape as InternalJournal of Institution of Engineers (India) Ser. E, Scopus, -2014, 95, 49-56

WalltoBed Mass Transfer in a Fluidized Bed with Twisted TapesAdvanced Chemical Engineering Research, Google scholar, -2013, 2, 27-34

Studies on Pressure Drop and Bed Porosity in Liquid Fluidized Beds with Twisted Tape InternalsThe IUP Journal of Chemical Engineering, Google scholar, -2012, III, 30-44

Mass Transfer at the Confining Wall of an Electrochemical Cell in the Presence of Twisted TapesThe IUP Journal of Chemical Engineering, Google scholar, -2011, III, 23-34

Optimizing Surface Finish in WEDM Using the Taguchi Parameter Design MethodJournal of the Brazilian Society of Mechanical Science & Engineering, Web of science, -2010, XXXII, 107-113

An approach to feature based three dimensional modelling and similarity assessment of turned componentsProceedings of the Institution of Mechanical Engineers, Part B Journal of Engineering Manufacture, Web of science, -2007, 221, 1651-1656

Automatic Modular Fixture Generation in ComputerAided Process Planning Systems Proceedings of the Institution of Mechanical Engineers, Part C Journal of Mechanical Engineering Science, Web of science, -2005, 219, 1147-1152

Title of the projectFunded byDurationSanctioned date
Title of the projectFunded byDurationSanctioned date
Automatic Feature Recognition and Machining Setup Generation from 2D DrawingsUGC24
Title of the bookBook / ChapterName of the publisherSubject areaEditionPage numbersISBNPublished year
Lecture Notes in Mechanical EngineeringChaptersSpringerMechanical Engineering8853-86097898115120012020
Lecture Notes in Mechanical EngineeringChaptersSpringerMechanical Engineering81179-118897898115120012020
Advances in Forming,Machining and AutomationChaptersSpringer SigaporeManufaturingEd1689-69897898132941722019
Seminar nameOrganized byVenueStart dateEnd dateTitle of the paper presentedRoleCo presenter
NationalDept. of Mechanical Engg, National Engineering College, K.R. Nagar, Kovilpatti, Tamil Nadu.Dept. of Mechanical Engg, National Engineering College, K.R. Nagar, Kovilpatti, Tamil Nadu.26-Nov-200427-Nov-2004Automatic Fixture Generation for Prismatic Components in CAPP SystemsParticipated
NationalDepartment of Mechanical Engineering, Kakatiya Institute of Technology & Science, WarangalKakatiya Institute of Technology & Science, Warangal17-Nov-200419-Nov-2004Development of Measuring Setups for Geometrical Tolerances from Machining Setups in Process Planning SystemsParticipated
NationalK.K.Wagh College of Engineering, NasikK.K.Wagh College of Engineering, Nasik14-Jun-200416-Jun-2004Error Analysis In Machining Setup A Case Study Of 3 Jaw ChuckParticipated
Seminar nameOrganized byVenueStart dateEnd dateTitle of the paper presentedRoleCo presenter
InternationalDepartment of Mechanical EngineeringN.B.K.R.Institute of Science and Technology,Vidyanagar, S.P.S.R..Nellore .Dt.07-Feb-202009-Feb-2020Effecdt of Heat Treatment on Mechanical Properties of Aluminium Metal Matrix Composite(AA606 MSO2ParticipatedChandra Sekhar
InternationalVIT,Vellore and Queenland University of Technology, AustraliaVIT,Vellore08-Dec-200410-Dec-2004Development of computer aided tolerance charting(GCAT) from CAD modelParticipated
InternationalKalinga Institute of Industrial Technology, KIIT, Patia, Bhubaneswar Institute of Industrial Technology Kalinga19-Dec-200321-Dec-2003Automatic Machining Setup Generations in CAPP SystemParticipated
Title of the thesisName of the studentName of the college / universityMajor subject areaYear of admissionType of admissionThesis specification
Optimizing Productivity and Cost Reduction with Effective Supply Chain Management by Elimination of Hydrocarbon Leak on Process Piping without Shutdown of FacilitiesPrasad Chowdary.V.S.V.V.R.K.PrivateIndustrial Engineering2018Full timePhD
Evaluation of Mechanical Properties of Aluminium Alloy AA6061 Reinforced with MoS2 Metal Matrix Composite after Joining Using TIG and FSW ProcessesM.Chandra SekharANITSManufacturing2018Part timePhD
Title of the thesisName of the studentName of the college / universityMajor subject areaYear of admissionType of admissionThesis specification
Impact of Training in Manufacturing IndustryV.LeelasaradaChirala Engineering CollegeIndustrial Engineering2018Part timePhD
Title of the thesisName of the studentName of the college / universityMajor subject areaYear of admissionType of admissionThesis specification
Influence of Vibratory TIG Welding Process Parameters on the Mechanical Behavior of Aluminum 5052 Alloy WeldmentsM.Vykunta RaoGMRITManufacturing2019Part timePhD
Some Aspects of Spatial Visualization and Process Performance Studies for Improved Process Capability in Product Manufacturing ProcessG.V.S.S.SharmaGMRITManufacturing2017Part timePhD
Studies on Mass Transfer in MultiPhase Flow Systems with Twisted Tape InternalsB.Surya SubramanyamVITAM College of EngineeringThemal2016Part timePhD
TitleTypeOrganized byVenueStart dateEnd dateRole
TEQIP Conclave on Enhancing Quality of TEchnical Education and ResearchQuality improvement programDepartment of Mechanical Engineering,IIT, HyderabadIIT,Hyderabad07-Mar-201408-Mar-2014Participated
Product Design and DevelopmentFaculty development programDepartment of Industrial Engineering,GIT,GITAM,VisakhapatnamGIT,GITAM, Visakhapatnam21-Feb-201422-Feb-2014Participated
Fundamentals of NanotechnologyTraining of tutorsDepartment of Mechanical EngineeringGIT,GITAM,Visakhapatnam17-Feb-201421-Feb-2014Participated
Workshop on Computer Tomography (CT2001)Faculty development programIIT, KanpurIIT, Kanpur12-Dec-200113-Dec-2001Participated
Short Term course on FEM in CAD systemsFaculty development programDepartment of Marine Engineering,Andhra University, VisakhapatnamAndhra University, Visakhapatnam07-Jun-200108-Jun-2001Participated
Short Term course on Design For ManufacturabilityTraining of tutorsDepartment of Mechanical Engineering,R.E.C.,WarangalR.E.C.,Warangal25-Dec-199907-Jan-2000Participated
Short Term course on NC Part ProgrammingTraining of tutorsDepartment of Mechanical Engineering,IIT, KanpurIIT, Kanpur17-Sep-199821-Sep-1998Participated
TitleTypeOrganized byVenueStart dateEnd dateRole
Organization nameMembership categoryMembership type
Institute of EngineersLifeMember
Indian Society for Technical EducationLifeMember
Title of the projectName of the principal investigatorName of the co investigatorName of the client / agency fundedDuration
Development of Nano Technology Based Coatings for IC Engine CylindersS.Kamalluddin B.Surendra Babu as CoordinatorVRDO,DRDO36 months
Title of the projectName of the principal investigatorName of the co investigatorName of the client / agency fundedDuration