Srinivasa Rao P.

Srinivasa Rao P.

Assistant Professor, Mechanical Engineering, GST , VSP

Education
Ph. D.
Email ID
spujari@gitam.edu
Education
Ph. D.

Education

Degree Name Institute & College name Year of Graduation/Award
Ph.D. Andhra university college of Engineering 2013
M.Tech. National Institute of Technology 2003
B.Tech. Kakatiya Institute of technology and science 2001

Experience

Designation Organization From Date To Date
Assistant Professor M.V.G.R College of Engineering 11-10-2006 26-06-2007
Teaching Associate Andhra University 06-10-2003 10-10-2006

EDMed Inconel 718 Using Powder Metallurgy (PM) Sintered Electrode Made With Nano and Micron Sized PowdersEngineering Review, Web of science, MAY-2020, 40, 52-64

Energy dissipation in WC Co Coated A356.2 RHA CompositesEngineering Science and Technology, an International Journal, Web of science, APR-2020, 23, 1285-1290

Effects of AMWCNTs and ETBN toughener on Impact, compression and damping properties of carbon fiber reinforced epoxy compositesJournal of Materials Research and Technology, Web of science, -2019, 8, 896-903

Surface alloying of D2 steel using EDM with WCCo PM electrodes made of Nano and Micron sized particlesMaterials Research Express, Web of science, -2019, 6, 036511-15

Grey relational analysis of EDM of Ti6Al4V using TiCCu composite tool electrode made with nano and micron sized particles International Journal of Engineering and Advanced Technology, Scopus, OCT-2019, 9, 6154-6162

The Effect of T6 Heat Treatment on Corrosion Behavior of Nickel Electroplated Metal Matrix CompositesSilicon, Web of science, -2019, 6, 036511-15

Surface Modification of Ti6Al4V alloy using EDM electrode made with nano and Micron sized TiCCu powder particlesArabian Journal for Science and Engineering, Web of science, -2019, 44, 1425-1436

Effect of nickel electroplating on the mechanical damping and storage modulus of metal matrix compositesMaterials Research Express, Web of science, -2018, 5, 116409-10

Surface integrity of wire EDMed aluminum alloyA comprehensive experimental investigationJournal of King Saud University Engineering Sciences, Scopus, -2018, 30, 368-376

Dynamic mechanical behavior of WCCo coated A356.2 aluminum alloy, Journal of alloys and compoundsJournal of alloys and compounds, Web of science, -2018, 767, 988-993

Analysis of Process Capability About Turning CenterInternational Journal of Engineering, Science and Mathematics, Google scholar, -2017, 6, 881-886

EFFECT OF HALIDE FLUXES AND WELDING PARAMETERS ON PENETRATION AND HAZ OF TITANIUM ALLOYJournal of Production Engineering, Google scholar, -2016, 19, 81-86

Effect of wire EDM conditions on Generation of Residual Stresses in Machining of Aluminium 2014 T6 AlloyAlexandria Engineering journal, Web of science, -2016, 55, 1110-0168

STUDY OF INFLUENCE OF PROCESS PARAMETERS ON SURFACE ROUGHNESS OF AMMCS IN WIREELECTRICAL DISCHARGE MACHINEARPN Journal of Engineering and Applied Sciences, Scopus, -2015, 10, 1595-1061

Experimental Investigation and Optimization of Wire EDM Parameters for Surface Roughness, MRR and White Layer in Machining of Aluminium alloyProcedia Materials Science, Citeseer, -2014, 5, 2197-2206

Effect of WEDM Conditions on Surface Roughness A Parametric Optimisation Using TaguchiMethodInternational Journal of Advanced Engineering, Sciences and Technologies, Google scholar, -2011, 6, 41-48

Prediction of Material removal rate forAluminum BIS24345 Alloy in wirecut EDMInternational Journal of Engineering, Science and Technology, Google scholar, -2010, 2, 7729-7739

Title of the project Funded by Duration Sanctioned date
Title of the project Funded by Duration Sanctioned date
Development of wear and corrosion resistant EDMed surface using WCCo composite electrode made by Powder metallurgy DST SERB 36 17-Jul-2014
Board name Journal name
Board name Journal name
Materials Today Communications Editorial Board Materials Today Communications
King Fahd University of Petroleum and Minerals Arabian Journal for Science and Engineering (AJSE)
Seminar name Organized by Venue Start date End date Title of the paper presented Role Co presenter
National Dept. of Production Technology, MIT, Anna University Visakhapatnam 25-Feb-2005 26-Feb-2005 Kinematic Analysis of Serial Manipulators using DH matrix Participated Prof. K. Ramji and Prof. Beela Satyanarayana
Seminar name Organized by Venue Start date End date Title of the paper presented Role Co presenter
International BITS, Vizag and Centurian University BITS vizag 22-Dec-2017 24-Dec-2017 Analysis of Process Capability about Turning center Participated Ch. Venkata Rao
International Dept. of Mechanical Engineering, IIT Madras, Chennai IIT Madras, Chennai 08-Aug-2014 09-Aug-2014 Measurement of Residual Stresses Produced by EDM of Aluminum Alloy Participated Prof. Ramji and Prof. Beela Satyanarayana
International Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, Mangalore National Institute of Technology Karnataka, Surathkal, Mangalore 27-Mar-2014 29-Mar-2014 Experimental Investigation and Optimization of Wire EDM Parameters for Surface Roughness, MRR and White Layer in Machining of Aluminium alloy Participated Prof. Koona Ramji and Prof. Beela Satyanarayana
International ISTAM and Andhra University Visakhapatnam 18-Dec-2006 21-Dec-2006 An intelligent CADCAM system for plate CAMS Participated Prof. K. Ramji and Prof. Beela Satyanarayana
Title of the thesis Name of the student Name of the college / university Major subject area Year of admission Type of admission Thesis specification
Surface Modification and Improvement of properties of D2 steel machined by WC and Co Composite EDM electrode Ms. Saradapurnima Nadimpalli Institute of Technology GITAM Manufacturing Part time PhD
Development of Self Lubricating Composite cutting tool material with improved properties at elevated temperatures Mr. Bagadi Pradeep Kumar Institute of Technology GITAM Manufacturing Part time PhD
Title of the thesis Name of the student Name of the college / university Major subject area Year of admission Type of admission Thesis specification
Title of the thesis Name of the student Name of the college / university Major subject area Year of admission Type of admission Thesis specification
Title Type Organized by Venue Start date End date Role
Integration of computer based methodologies in mechanical engineering systems Faculty development program MVGR College of Engineering Vizianagaram 25-May-2009 06-May-2009 Participated
Computer Numerical Control and APT Programming Faculty development program GMRIT Rajam 08-Jan-2005 09-Jan-2005 Participated
Title Type Organized by Venue Start date End date Role
Quality Research writing and Research impact measures Faculty development program GITAM Visakhapatnam 04-Jan-2016 04-Jan-2016 Participated
Organization name Membership category Membership type
Associate Member of Institution of Engineers Individual Associate member