Faculty Profile
Siva Prasad D.
Professor, Mechanical Engineering, GST , VSP
Education
Ph. D.Email ID
sdora@gitam.eduEducation
Ph. D.Education
| Degree Name | Institute & College name | Year of Graduation/Award |
|---|---|---|
| PhD | Andhra University | 2012 |
| M.E | Andhra University | 2002 |
| B.E | GITAM | 1998 |
Experience
| Designation | Organization | From Date | To Date |
|---|---|---|---|
| Supervisor | Synergies- DoorayPvt Ltd | 10-11-2001 | 18-09-2002 |
| Graduate Engineer Trainee | Visakhapatnam Port Trust | 01-03-1999 | 29-02-2000 |
Awards
| Award name | Award Organization | Awarded year |
|---|---|---|
| Best Researcher Award | GITAM | 2021 |
| Outstanding reviewing Award | Elsevier | 2017 |
Simultaneous optimization of machine and tool parameters for edm using WCCO PM electrode made with micron and nano sized particlesMetallurgical and Materials Engineering, Web of science, FEB-2021, In press, 1-20
Experimental and numerical investigation of wingwing interaction and its effect on aerodynamic force of a robotic dragonfly during hovering and forward flightArchive of Applied Mechanics, Web of science, MAR-2021, In press, 1-14
Investigations on the Influence of Laminate Angle on the Damping Performance of Cross ply Natural CompositesJournal of Materials Engineering and Performance, Web of science, JAN-2021, In press, 1-7
Numerical investigation of wing wing interaction and its effect on the aerodynamic force of a hovering dragonflyProceedings of the Institution of Mechanical Engineers, Part G Journal of Aerospace Engineering, Web of science, JAN-2021, In press, 1-20
Effect of fiber orientation on dynamic mechanical properties of PALF hybridized with basalt reinforced epoxy compositesMaterials Research Express, Web of science, JAN-2020, 7, 1-12
Wear behavior ofwire electric discharge machined surface of316L stainless steelSN Applied Sciences Springer, Web of science, -2020, 2, 1-8
Energy Dissipation in WCCo coated A356.2RHA compositesEngineering Science and Technology, an International Journal, Web of science, APR-2020, In press, 1-6
Corrosion behavior of surface induced bywire EDM on 316L stainless steel an experimental investigationSN Applied Sciences Springer, Web of science, -2019, In press, 1-11
Dynamic mechanical properties of epoxy based PALF basalt hybrid composite laminatesMaterials Research Express, Web of science, SEP-2019, 6, 1-12
Investigations on the Machinability of AlSiCRHA Hybrid Metal Matrix CompositesSilicon, Web of science, -2019, in Press, 1-10
Surface alloying of D2 steel using EDM with WCCo PM electrodes made of Nano and Micron sized particlesMaterials Research Express, Web of science, -2018, 6, 1-9
Surface Integrity Analysis and Simultaneous Optimization Using Taguchi Grey Relational AnalysisInternational Journal of Advanced Science and Technology, Scopus, -2018, 114, 11-22
Dynamic mechanical behavior of WCCo coated A356.2 aluminum alloyJournal of Alloys and Compounds, , Web of science, -2018, 767, 988-993
The Effect of T6 Heat Treatment on Corrosion Behavior of Nickel Electroplated Metal Matrix CompositesSilicon, Web of science, -2018, in Press, 1-10
Investigations of Surface roughness, Power Consumption, MRR and Tool wear while turning hybrid compositesMaterials Today Proceedings, Scopus, -2018, 5, 16565-16574
Optimizing of Wire EDM Parameters for Damping Capacity of Aluminum AlloyMaterials Today Proceedings, Scopus, -2018, 8, 16832-16839
Analysis of Anisotropy in Turned Surfaces Using Vision Based 3D Surface TopographyMaterials Performance and Characterization, Web of science, -2017, 6, 318-332
The Effect of Nickel Electroplating on Corrosion Behavior of Metal Matrix CompositesTransactions of the Indian Institute of Metals , Web of science, -2017, 70, 2601-2607
Experimental evaluation onto the damping behavior of AlSiCRHA hybrid compositesJournal of materials research and technology, Web of science, -2016, 5, 123-130
Damping Behavior of Commonly used Reinforcement Powders An Experimental ApproachEngineering Science and Technology, an International Journal, Scopus, -2015, 18, 674-679
Influence of wire EDM parameters on the damping behaviour of A356.2 aluminum alloyJournal of Alloys and Compounds, , Web of science, -2015, 646, 257263
Damping behavior of metal matrix compositesTransactions of the Indian Institute of Metals , Web of science, -2015, 68, 161-167
Cathodic Arc deposition for machining applicationsMaterials Science An Indian Journal, Others, -2015, 12, 142-146
Hybrid compositesa better choice for high wear resistant materialsJournal of materials research and technology, Web of science, -2014, 3, 172-178
Effect of Heat treatment on the White layer and its effect on the Damping Behavior of Metal Matrix CompositesMaterials Science and Engineering A, Web of science, -2014, 599, 25-27
Effect of white layer on the damping capacity of metal matrix compositesMaterials Science and Engineering A, Web of science, -2014, 591, 78-81
Investigations on mechanical properties of aluminum hybrid compositesJournal of materials research and technology, Web of science, -2014, 3, 79-85
Condition Monitoring of CNC Machining Using Adaptive Controlnternational Journal of Automation and Computing, Scopus, -2013, 10, 202-209
Tribological Properties of A356.2RHA CompositesJournal of Materials Science and Technology, Web of science, -2012, 28, 367-372
Effect of T6 heat treatment on damping characteristics of AlRHA compositesBulletin of Materials Science, Web of science, -2012, 35, 989-995
Scanning Electron Microscope studies on dry sliding wear behavior of metal matrix composites with Aluminum and rice husk ashInternational Journal of Integrative sciences, Innovation and Technology, Others, -2012, 2, 1-5
Preparation and Damping Behavior of A356.2 RHA CompositesJournal of Manufacturing Engineering, Others, -2011, 6, 116-120
Production and Mechanical Properties of A356.2 RHA CompositesInternational Journal of Advanced Science and Technology, Others, -2011, 33, 51-57
Damping behavior of AlSi7Mg SiCp compositesInternational Journal on Mechanical and Automobile Engineering, Others, -2010, 12, 57-63
Fabrication and Characterization of A356.2 Rice husk ash composite using stir casting techniqueInternational Journal of Engineering Science and Technology, Citeseer, -2010, 2, 7603-7608
| Title of the project | Funded by | Duration | Sanctioned date |
|---|
| Title of the project | Funded by | Duration | Sanctioned date |
|---|---|---|---|
| Effect of WCCo coatings and Heat treatment of the Damping behavior of Aluminium metal matrix composites | SERB DST | 36 | 09-Jul-2013 |
| Investigation of Damping Behavior of Aluminum Based RHASiC Particles Reinforced Metal Matrix Composites | GITAM | 12 | 29-Mar-2010 |
| Title of the book | Book / Chapter | Name of the publisher | Subject area | Edition | Page numbers | ISBN | Published year |
|---|---|---|---|---|---|---|---|
| Damping Behavior of Rice husk ash reinforced Metal Matrix Composites An Experimental Approach | Book | Lambert Academic Publishing | Composites | 1 | 978365919061 | 2012 | |
| Optimal Trajectory for path Constraint Motion of a planar manipulator Using Genetic Algorithms | Book | Lambert Academic Publishing | Robotics | 1 | 9783659 2043 | 2012 |
| Board name | Journal name |
|---|---|
| International | International Journal of Composite Materials and Matrices |
| Board name | Journal name |
|---|---|
| Interanational | Journal of Materials Research and Technology(Elsevier) |
| Interanational | Defence technology(Elsevier) |
| Interanational | Journal of Alloys and Compounds(Elsevier) |
| International | Journal of Engineering Science and Technology(Elsevier) |
| International | Arabian Journal for Science and Engineering (Springer) |
| Seminar name | Organized by | Venue | Start date | End date | Title of the paper presented | Role | Co presenter |
|---|---|---|---|---|---|---|---|
| National | GITAM | GITAM, Visakhapatnam | 22-Dec-2017 | 23-Dec-2017 | Organized | ||
| National | Andhra University | Andhra University, Visakhapatnam | 11-Jun-2003 | 12-Jun-2003 | Static analysis of an alloy wheel | Participated | Nil |
| Seminar name | Organized by | Venue | Start date | End date | Title of the paper presented | Role | Co presenter |
|---|---|---|---|---|---|---|---|
| International | IIT Delhi | IIT Delhi | 03-Oct-2015 | 04-Oct-2015 | Influence of Pulse on Time on the Damping Behaviour of Aluminum Alloy | Participated | nil |
| International | NIT Calicut | NIT Calicut | 18-Feb-2014 | 18-Feb-2014 | Dry Sliding Wear behavior of Aluminium Hybrid Composites with RHA and SiC as reinforcement | Participated | Ch. Shoba |
| International | GITAM | GITAM, Visakhapatnam | 23-Dec-2005 | 24-Dec-2005 | Organized | ||
| International | GITAM | GITAM | 23-Dec-2005 | 24-Dec-2005 | Organized | ||
| International | GITAM | GITAM, Visakhapatnam | 23-Dec-2005 | 24-Dec-2005 | Underwater Explosion damage of FRP Submersible Hull | Participated | Nil |
| Title of the thesis | Name of the student | Name of the college / university | Major subject area | Year of admission | Type of admission | Thesis specification |
|---|---|---|---|---|---|---|
| An optimal design ornitopter | P.K.Swain | GITAM | Mechanisms | Part time | PhD | |
| WEDM machining using micron and nano sized electrodes | N. Saradha Purnima | GITAM | manufacturing | Part time | PhD | |
| Damping behavior of electroplated MMC | Dorathi Kare | GITAM | Design | Part time | PhD | |
| Energy dissipation in WCCo coated MMCs | Radha Tulasi | GITAM | Design | Part time | PhD |
| Title of the thesis | Name of the student | Name of the college / university | Major subject area | Year of admission | Type of admission | Thesis specification |
|---|
| Title of the thesis | Name of the student | Name of the college / university | Major subject area | Year of admission | Type of admission | Thesis specification |
|---|---|---|---|---|---|---|
| Corrosion and Dynamic Mechanical Behaviour of Nickel Electroplated Metal Matrix Composites An Experimental Approach | Mr. Stanley Ebenezer | GITAM | Electroplating | 2019 | Full time | PhD |
| Name of the award | Awarded by | Awarded year |
|---|---|---|
| Outstanding reviewer award | Journal of Materials Research and Technology Elsevier | 2017 |
| Young Scientist award | DST | 2013 |
| Title | Type | Organized by | Venue | Start date | End date | Role |
|---|---|---|---|---|---|---|
| Integration of Computer based Methodologies in Mechanical Engineering Systems | Faculty development program | GITAM | GITAM | 25-May-2009 | 06-Jun-2009 | Participated |
| Finite Element Analysis and its Applications | Faculty development program | GITAM | GITAM | 16-Feb-2009 | 28-Feb-2009 | Organized |
| Instructional Design and Delivery | Quality improvement program | GITAM | GITAM | 23-Jan-2007 | 28-Jan-2007 | Participated |
| Advanced Composites (Materials, Manufacture, and Applications | Faculty development program | GITAM | GITAM | 17-Jul-2006 | 22-Jul-2006 | Participated |
| Condition Monitoring of Mechanical Systems | Faculty development program | GITAM | GITAM | 24-Mar-2005 | 24-Mar-2005 | Participated |
| Industrial Applications of Finite Element Analysis using ANSYS Package | Faculty development program | GITAM | GITAM | 07-Feb-2005 | 12-Feb-2005 | Participated |
| CADCAM Integration and Applications | Faculty development program | GITAM | GITAM | 05-May-2003 | 17-May-2003 | Participated |
| Title | Type | Organized by | Venue | Start date | End date | Role |
|---|
| Organization name | Membership category | Membership type |
|---|---|---|
| Associate Member of Institution of Engineers | Individual | Member |
| Title of the lecture | Name of the college / university | Place | Date |
|---|---|---|---|
| Theory of Machines | Sanketika | Visakhapatnam | 29-Feb-2016 |
| Title | Application number | Category | Submitted date |
|---|---|---|---|
| An Optimal Design Ornithopter | 20809 2019 CHE | Indian | 20 May, 2019 |
| Title | Application number | Category | Submitted date |
|---|
| Title | Application number | Category | Submitted date |
|---|