Faculty Profile

Shabana

Shabana

Associate Professor, Mechanical engineering, GST, VSP

Education
Ph. D.
Email ID
sshabana@gitam.edu
Education
Ph. D.

Education

Degree NameInstitute & College nameYear of Graduation/Award
EVALUATION OF MECHANICAL AND TRIBOLOGICAL PROPERTIES OF CERMET AND ALLOY BASED BLENDED COATINGSAndhra University2016
MTech2004
SCET2000

Experience

DesignationOrganizationFrom DateTo Date
Assistant ProfessorGITAM School of Technology06-07-201204-11-2022
Assistant ProfessorSri Chaitanya college of Engineering21-11-201105-07-2012
Assistant ProfessorKaushik College of Engineering03-01-201119-11-2011
Assistant ProfessorGITAM College of Engineering01-10-200319-01-2008
LecturerNCET01-06-200120-02-2002

Multi objective optimization of the tribological responses of cermet andalloy based blended coatings using response surface methodology coupledwith principal component analysisSurfaces and Interfaces, Web of science, DEC-2020, 21, 2468-2474

Response optimization using VIKOR while machining on lathe under dryand minimum quantity and lubrication conditions A case studyElsevier (Materials Today Proceedings), Scopus, SEP-2020, 27, 24872491

Experimental syudy of surface roughness and cutting forces on stainless steel grade materialsInternational Journal of Mechanical Engineering and Technology (IJMET), Scopus, -2019, 10, 87-96

Studying the Mechanical properties of Aluminum 6063 reinforced with Silicon Carbide and Mica International Journal of Engineering and Advanced Technology (IJEAT) , Scopus, -2019, 8, 153-156

Enhancing the Mechanical Properties of Metal Matrix Composites by Reinforcing Aluminum 6063 with Silicon Carbide and Mica International Journal of Innovative Technology and Exploring Engineering (IJITEE) , Scopus, -2019, 8, 119-123

Evaluating the Mechanical Properties of Commonly Used 3d Printed ABS and PLA Polymers with Multi Layered Polymers International Journal of Engineering and Advanced Technology (IJEAT, Scopus, -2019, 8, 2351-2356

Multiresponse optimization of hot extrusion process parameters using FEM and Grey relation based Taguchi methodMaterials Today Proceedings, Scopus, OCT-2019, 18, 381-401

Enhancing the Mechanical Properties of Metal Composite by Reinforcing Aluminium 6063 with SiC GraphiteInternational Journal of Engineering Research & Technology (IJERT), Others, -2018, 6, 1-5

Analysis of Tribological behaviour in Sugarcane Bagasse Ash Reinforced Aa6063 compositeInternational Journal of Engineering Research & Technology (IJERT), Others, -2018, 6, 1-5

Experimental Evaluation for MultiResponse Optimality on AISI 316L Materials with coated carbide inserts using GRA and Vikor MethodsInternational Journal of Mechanical and Production Engineering Research & Development (IJMPERD), Scopus, -2018, 8, 1197-1206

Study of Mechanical Properties and Wear Behaviour of Sugarcane Ash Reinforced Aluminium CompositesInternational Journal of Mechanical Engineering and Technology (IJMET), Scopus, -2017, 8, 597-606

Sliding Wear Behavior of High Velocity OxyFuel Sprayed WCCO CoatingsInternational Journal of Advanced Science and Technology, Google scholar, -2016, 93, 45-54

Tribological and Corrosion behavior of HVOF Sprayed WCCo,NiCrBSi and Cr3C2NiCr Coatings and analysis using Design ofExperimentsScience Direct, Elsevier, Materials Today Proceedings , Scopus, -2015, 2, 2654-2665

EFFECT ON THE PROPERTIES OF CERAMIC COATINGSWHEN BLENDED AND SPRAYED USING HIGH VELOCITYOXYGEN FUEL PROCESSJournal of Manufacturing Engineering, Others, -2014, 9, 202-211

Corrosion behavior of HVOF sprayed WCCo,NiCrBSi and Cr3C2NiCr coatingsJournal Science of Corrosion science and Engineering, Scopus, -2014, 17, 34

Title of the bookBook / ChapterName of the publisherSubject areaEditionPage numbersISBNPublished year
Electrical and Mechanical TechnologyBookS. Chand Publishingmechanical Engineering197893525350882017
Seminar nameOrganized byVenueStart dateEnd dateTitle of the paper presentedRoleCo presenter
NationalA.U College of Engineering Andhra UniversityAndhra University29-Mar-201829-Mar-2018Heat Count Reduction Using Line Balancing Approach in Automobile manufacturing BodyshopParticipated
NationalAMMT 2004JNTU Hyderabad08-Mar-200409-Mar-2004A VISION SYSTTI]T FOR THE EXTRACTION OF CIRCULAR OBJECTSParticipated
NationalJNTU and CITD HyderabadJNTU Hyderabad08-Mar-200409-Mar-2004INSPECTIO OF PRINTF]D CIRCUIT BOARDS USING VISION SYSTEN,IParticipated
Seminar nameOrganized byVenueStart dateEnd dateTitle of the paper presentedRoleCo presenter
InternationalDepartment of Metallurgical and Materials Engineering, National Institute of Technology, Tiruchirappalli620 015, India.Department of Metallurgical and Materials Engineering, National Institute of Technology, Tiruchirappalli620 015, India.20-Mar-201922-Mar-2019Response optimization using VIKOR while machining on lathe under dry and minimum quantity and lubrication conditionsA case studyParticipatedK.Arun Vikram
InternationalIFERPVVIT, Guntur, A.P16-Nov-201817-Nov-2018Enhancing the mechanical properties of metal matrix composite by reinforcing Aluminium 6063with Silicon carbide and MicaParticipated
InternationalElsevier Materials Today ProceedingsDIET27-Dec-201628-Dec-2016MultiResponse Ottnnrzarion ,rl Nlachining Parairelers Aluninum SuSarcare Bagassc Ash Compo!ile 2E31 ThrorghTaguchi Gre Relat .nalEnlropy MerhodParticipatedV V K lakshmi
InternationalDadi Institute of TecchnologyDadi Institute of Tecchnology27-Dec-201628-Dec-2016Optimization of hot extrusion process parameters for AA6061 fly ash composite through simulationParticipatedJ. Sarojijni
InternationalICMPCGokuraj Gangaraj college of engineering Hyderabad14-Mar-201515-Mar-2015Tribological and Corrosion behaviour of HVOF sprayed WCCo, NiCr and Cr3C2 NiCr coatings and Analysis using DOEParticipated
Title of the thesisName of the studentName of the college / universityMajor subject areaYear of admissionType of admissionThesis specification
Title of the thesisName of the studentName of the college / universityMajor subject areaYear of admissionType of admissionThesis specification
Title of the thesisName of the studentName of the college / universityMajor subject areaYear of admissionType of admissionThesis specification
Response Evaluation While Machining Stainless Steel Grade Materials Under Dry And Mist Conditions Using Hybrid Multi Response OptimizationT.Vijay Krishna KanthGIT GITAM Universitymachining2019Part timePhD
TitleTypeOrganized byVenueStart dateEnd dateRole
3D printing and Additive ManufacturingFaculty development programGitam Institute of Technology, GITAM UniversityGitam Institute of Technology, GITAM University11-Jun-201812-Jun-2018Participated
Fluid MechanicsFaculty development programGitam Institute of Technology, GITAM UniversityGitam Institute of Technology, GITAM University05-Jun-201710-Jun-2017Participated
Basics of PedagogyFaculty development programGitam Institute of Technology, GITAM UniversityGitam Institute of Technology, GITAM University29-Apr-201430-Apr-2014Participated
Centre for learning and sustainabilityFaculty development programGitam Institute of Technology, GITAM UniversityGitam Institute of Technology, GITAM University22-Dec-201212-Jan-2013Participated
Instructional Design and DeliveryQuality improvement programMinistry of HRD Chennai Govt of IndiaGitam Institute of Technology, GITAM University23-Jan-200728-Jan-2007Participated
Orientation program for teachersFaculty development programGitam Institute of Technology, GITAM UniversityGitam Institute of Technology, GITAM University16-Nov-200618-Nov-2006Participated
one day workshop on Condition monitoring of mechanical systemsQuality improvement programGitam Institute of Technology, GITAM UniversityGitam Institute of Technology, GITAM University24-Mar-200524-Mar-2005Participated
Industrial applications of FEA using ANSYS pacakageQuality improvement programGitam Institute of Technology, GITAM UniversityGitam Institute of Technology, GITAM University07-Feb-200512-Feb-2005Participated
Optimisation Methods for Engineering Design by S.S.RaoQuality improvement programGitam Institute of Technology, GITAM UniversityGitam Institute of Technology, GITAM University05-Jul-200410-Jul-2004Participated
Short term training program (STTP), Neural Networks and Fuzzy TechniquesQuality improvement programISTEGitam Institute of Technology, GITAM University22-Mar-200427-Mar-2004Participated
TitleTypeOrganized byVenueStart dateEnd dateRole
Product Design and DevelopmentFaculty development programIIT RoorkeeNPTEL28-Jan-201928-Feb-2019Participated
Technopreneurship Development Program on Advanced CompositesQuality improvement programDSTGitam Institute of Technology, GITAM University17-Jul-200622-Jul-2006Organized