Arun Vikram K.

Arun Vikram K.

Associate Professor, Mechanical Engineering, GST , VSP

Education
Ph. D.
Email ID
akothapa@gitam.edu
Education
Ph. D.

Education

Degree NameInstitute & College nameYear of Graduation/Award
Ph.DAU COLLEGE OF ENGINEERING2016
M.EAU COLLEGE OF ENGINEERING2006
B.TechBAPATLA ENGINEERING COLLEGE1999

Experience

DesignationOrganizationFrom DateTo Date
Assistant ProfessorANITS Engineering college15-11-200616-06-2010
ENGINEER TRAINEESYNERGIES CASTINGS LIMITED27-10-200506-11-2006

Experimental study of surface roughness and cutting forces on stainless steel grade materialsInternational Journal of Mechanical Engineering and Technology, Scopus, -2019, 10, 87-96

Evaluating the Mechanical Properties of Commonly Used 3d Printed ABS and PLA Polymers with MultiLayered PolymersInternational Journal of Engineering and Advanced Technology, Scopus, -2019, 8, 2351-2356

Response optimization using VIKOR while machining on lathe under dry and minimum quantity and lubrication conditions A case studyMaterials Today Proceedings, Scopus, NOV-2019, online , 150-158

Optimization of Controllable Factors for Turning of Ti6Al4V Alloy Under RQCL EnvironmentInternational Journal of Innovative Technology and Exploring Engineering, Scopus, DEC-2019, 9, 4120-4126

Application of dragonfly algorithm for optimal performance analysis of process parameters in turnmill operations A case studyIOP Conf. Series Materials Science and Engineering, Scopus, -2018, 310, 012154

Evaluation of process parameters using GRA while machining low machinability material in dry and wet conditionsMaterials Today Proceedings, Scopus, -2018, 5, 25477-25485

Experimental evaluation for multiresponse optimality on AISI 316L material with coated carbide inserts using GRA AND VIKOR methodsInternational Journal of Mechanical and Production Engineering Research and Development, Scopus, -2018, 8, 1197-1206

Investigation on Dry Sliding Wear Behavior of Nylon66GnP NanocompositeJournal of The Institution of Engineers (India) Series D, Scopus, -2017, 98, 71-78

Vibration diagnosis and prognostics of Turnmilling operations using HSS and carbide end mill cuttersProcedia Technology, Scopus, -2016, 23, 217-224

Process monitoring and effects of process parameters on responses in TurnMilling operations based on SN ratio and ANOVAMeasurement, Others, -2016, 94, 221-232

Assessment of surface roughness and MRR while machining brass with HSS tool and carbide insertsIndian Journal of Engineering & Materials Sciences, Others, -2015, 22, 321-330

Investigation of machining parameters on Surface Roughness in TurnMilling processesJOURNAL OF EMERGING TECHNOLOGY IN MECHANICAL SCIENCE AND ENGINEERING, Google scholar, -2015, 5, 178-184

Prediction of optimality and effect of machining parameters on Surface Roughness based on Taguchi Design of ExperimentsPrediction of optimality and effect of machining parameters on Surface Roughness based on Taguchi Design of Experiments, Google scholar, -2014, 3, 33-39

Damage Identification in Composite Materials Using Ultrasonic Based Lamb Wave MethodMeasurement Journal of the International Measurement Confederation , Others, -2013, 46, 904-912

Empirical model for Surface Roughness in hard turning based on Analysis of Machining Parameters and Hardness values of various Engineering MaterialsInternational Journal of Engineering Research and Applications, Google scholar, -2012, 2, 3091-3097

Optimization of Surface Roughness of FiberReinforced Composite Material in Milling Operationusing Taguchi Design MethodInternational Journal of Mechanics Structural, Google scholar, -2011, 2, 31-42

Title of the projectFunded byDurationSanctioned date
Analysis and correlation of Roughness, Temperatures and Tool wear using cutting forces and vision based surface textures in turnmilling operations of hard to machine materials in dry and minimum quantity lubrication environmentsSCIENCE & ENGINEERING RESEARCH BOARD (SERB)3615-Mar-2017
Title of the projectFunded byDurationSanctioned date
Title of the bookBook / ChapterName of the publisherSubject areaEditionPage numbersISBNPublished year
Lecture Notes in Mechanical EngineeringChaptersSpringerMechanical8853-86097898115120012020
Lecture Notes in Mechanical EngineeringChaptersSpringerMechanical8861-87197898115120012020
Operation Research for Decision ModelingBookMAHIMechanical1st97881940912262019
FLUID MECHANICS AND MACHINERYBookI.K.INTERNATIONALS NEW DELHIMECHANICAL2nd Edition97893811414102012
GEOMETRICAL DRAWING (A Generalised Approach)BookI.K.INTERNATIONALS NEW DELHIMECHANICAL1ST97893823320222012
Seminar nameOrganized byVenueStart dateEnd dateTitle of the paper presentedRoleCo presenter
NationalNational Institute of Technology RourkelaNational Institute of Technology Rourkela01-Mar-201302-Mar-2013Damping measurement in composite materials using combined finite element and frequency response methodParticipatedB.S.Ben
Seminar nameOrganized byVenueStart dateEnd dateTitle of the paper presentedRoleCo presenter
InternationalNIT WARANGALNIT WARANGAL02-May-201904-May-2019Multiresponse optimization of process parameters in Turnmilling processes An experimental approachParticipatedR.D.V.PRASAD
InternationalNIT WARANGALNIT WARANGAL02-May-201904-May-2019Effect of Exfoliated Vermiculite as thickening and foaming agent on the Physical Properties of Aluminium FoamParticipatedK.SURESH
Title of the thesisName of the studentName of the college / universityMajor subject areaYear of admissionType of admissionThesis specification
EXPERIMENTAL EVALUATIONS OF THERMAL RESPONSES ON TURNMILL PROCESS MACHINING OVER TITANIUM ALLOY MATERIAL UNDER MQCL CONDITIONSR.D.V.PRASADGITAMMANUFACTURING THERMAL OPTIMIZATION2018Part timePhD
PERFORMANCE EVALUATIONS OF ECOFRIENDLY METAL CUTTING WHILE MACHINING AISI 304 STAINLESS STEEL IN LATHE AND TURNMILL OPERATIONSA.M.VENKATA PRAVEENGITAMMANUFACTURING OPTIMIZATION2017Part timePhD
Title of the thesisName of the studentName of the college / universityMajor subject areaYear of admissionType of admissionThesis specification
Title of the thesisName of the studentName of the college / universityMajor subject areaYear of admissionType of admissionThesis specification
RESPONSE EVALUATIONS WHILE MACHINING STAINLESS STEEL GRADE MATERIALS UNDER DRY AND MIST CONDITIONS USING HYBRID MULTIRESPONSE OPTIMIZATIONTamma Vijay Krishna KanthGITMetal machining optimization2019Part timePhD
TitleTypeOrganized byVenueStart dateEnd dateRole
3D Printing and Additive ManufacturingFaculty development programGITAM, Mechanical DepartmentGITAM11-Jun-201812-Jun-2018Participated
Microsoft in Education Training ProgramQuality improvement programGITAMGITAM15-Dec-201715-Dec-2017Participated
Fluid MechanicsFaculty development programGITAM,Mechanical DepartmentGITAM05-Jun-201710-Jun-2017Participated
TitleTypeOrganized byVenueStart dateEnd dateRole
Organization nameMembership categoryMembership type
Institute of EngineersCorporateMember