Faculty Profile
Siva Surya M.
Assistant Professor, Mechanical Engineering, GST , HYD
Education
Ph. D.Email ID
smulugun@gitam.edu
Education
Ph. D.Education
| Degree Name | Institute & College name | Year of Graduation/Award |
|---|---|---|
| Ph.D. | JNTU Anantapur | 2022 |
| M.Tech | NIT WARANGAL | 2010 |
| B.Tech | KSRM College | 2008 |
Experience
| Designation | Organization | From Date | To Date |
|---|---|---|---|
| Lecturer | RGUKT | 16-08-2010 | 31-05-2013 |
Awards
| Award name | Award Organization | Awarded year |
|---|---|---|
| SILVER MEDAL | NPTEL | 2019 |
Investigation of Mechanical and Wear Behaviour of Al7075SiC Composites Using Response Surface Methodology.Silicon, Web of science, JAN-2021, 0, 1-10
Effect of SiC Weight Percentage on Tribological Characteristics of Al7075SiC CompositesSilicon, Web of science, JAN-2021, 0, 1-10
Effect of Silicon Carbide Weight Percentage and Number of Layers on Microstructural and Mechanical Properties of Al7075SiC Functionally Graded Material.silicon, Web of science, JAN-2021, 0, 1-10
Effect Of namyl alcoholbiodiesel blended nano additives on the performance, combustion and emission characteristics of CRDI diesel engine.Environmental Science and Pollution Research, Web of science, MAR-2021, 0, 1-16
Statistical and experimental investigation of the influence of fuel injection strategies on gasolinediesel RCCI combustion and emission characteristics in a diesel engineInternational Journal of Green Energy, Web of science, MAR-2021, 0, 1-21
Performance and emission predictions of a CRDI engine powered with diesel fuel A combined study of injection parameters variation and BoxBehnken response surface methodology based optimizationFuel, Web of science, APR-2021, 290, 1-23
Effect of SiC Weight Percentage and Sintering Duration on Microstructural and Mechanical Behaviour of Al6061SiC Composites Produced by Powder Metallurgy TechniqueSilicon, Web of science, APR-2021, 0, 1-9
An experimental assessment on the influence of high fuel injection pressure with ternary fuel (dieselMahua methyl esterPentanol) on performance, combustion and emission characteristics of common rail direct injection diesel engineHeat and Mass Transfer, Web of science, MAY-2021, 0, 1-13
Manufacturing, Microstructural and Mechanical Characterization of Stir Cast Aluminium 7075SiC Metal Matrix CompositeAdvances in Science and Technology, Google scholar, MAY-2021, 106, 84-89
Statistical and experimental investigation of the influence of fuel injection strategies on CRDI engine assisted CNG dual fuel diesel engine. International Journal of Hydrogen Energy, Web of science, JUN-2021, 46, 22149-22164
Fabrication, Mechanical and Wear Characterization of Silicon Carbide Reinforced Aluminium 7075 Metal Matrix CompositeSilicon, Web of science, FEB-2021, 0, 1-10
Physical and Mechanical Characterization of Al7075SiC Functionally Graded Materials Fabricated by Powder Metallurgy Route.Advances in Materials and Processing Technologies, Scopus, OCT-2020, 0, 1-17
Manufacturing and Mechanical Behavior of (AlSiC) Functionally Graded Material using Powder Metallurgy TechniqueInternational Journal of Innovative Technology and Exploring Engineering, Scopus, -2019, 8, 1835-1839
Optimization of Machining Parameters usingANOVA and Grey Relational Analysis whileTurning Aluminium 7075International Journal of Recent Technology and Engineering (IJRTE), Scopus, -2019, 8, 5682-5686
Synthesis and Mechanical Behaviour of (AlSiC) Functionally Graded Material Using Powder Metallurgy TechniqueMaterials Today proceedings, Scopus, NOV-2019, 18, 3501-3506
Tribological Behaviour of Aluminum Silicon Carbide Functionally Graded MaterialTribology in Industry, Scopus, -2018, 40, 247-253
Engine Performance and Emission Characteristics of Four Stroke Single Cylinder Diesel Engine by Using Rice Bran Oil as FuelJournal of Applied Mechanical Engineering, Google scholar, -2018, 7, 1-7
Multi Response optimization on En19 Steel Using Grey Relational Analysis through Dry and Wet MachiningMaterials Today Proceeding, Scopus, -2017, 4, 2157-2166
Manufacturing and Micro structure study of Al SiC Functionally graded materialMaterials Today Proceeding, Scopus, -2017, 4, 621-627
Optimization of Material Removal Rate and Surface Roughness in Dry and Wet Machining of En19 Steel Using Taguchi MethodInternational Journal of Research in Mechanical Engineering & Technology, Google scholar, APR-2017, 7, 0-0
Influence of Cutting Fluids on Tool Wear and Surface Roughness During Turning of AISI 316 Austenitic Stainless SteelInternational Journal of Engineering Research & Technology, Google scholar, JUL-2017, 6, 112-115
Effect of Approach Angle in Face Milling Using Tungsten Carbide ToolInternational Journal of Recent advances in Mechanical Engineering, Google scholar, MAY-2015, 4, 15-27
A Generic Framework to Optimize the Total Cost of Machining By Numerical ApproachIOSR Journal of Mechanical and Civil Engineering, Google scholar, AUG-2014, 11, 17-22
Optimization of Consignment Stock Policy Using Particle Swarm AlgorithmIOSR Journal of Mechanical and Civil Engineering, Google scholar, OCT-2014, 11, 54-61
| Board name | Journal name |
|---|
| Board name | Journal name |
|---|---|
| MECHE2016 DUBAI, UAE | Fourth International Conference on Mechanical Engineering |
| Budapest University of Technology and Economics | Periodica polytechnica mechanical engineering |
| Regional Information Center for Science and Technology | Journal of Applied Fluid Mechanics |
| COSMIC JOURNALS | International Journal of Research in Mechanical Engineering and Technology |
| WIREILLA PUBLISHING CORPORATION | International journal of Recent Advances in Mechanical Engineering (IJMECH) |
| IJERT | INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH & TECHNOLOGY |
| Sciencepublishinggroup | American Journal of Mechanical and Materials Engineering |
| Yildiz Technical University | Journal of Thermal Engineering |
| Seminar name | Organized by | Venue | Start date | End date | Title of the paper presented | Role | Co presenter |
|---|---|---|---|---|---|---|---|
| National | NIT JAMSHEDPUR | NIT JAMSHEDPUR | 31-Oct-2020 | 01-Nov-2020 | 1.To Study the Effect of Sintering Time on Microstructure and Mechanical Characteristics of Al6061SiC Composite Fabricated Using Powder Metallurgy Technique | Participated | |
| National | Department of Mechanical Engineering GITAM HYD | GITAM, HYDERABAD | 07-Aug-2015 | 07-Aug-2015 | Organized | ||
| National | JNTUA College of Engineering, Ananthapuramu | JNTU ANANTAPUR | 08-Mar-2014 | 08-Mar-2014 | Participated |
| Seminar name | Organized by | Venue | Start date | End date | Title of the paper presented | Role | Co presenter |
|---|---|---|---|---|---|---|---|
| International | CMR college | Hyderabad | 06-Mar-2020 | 07-Mar-2020 | Effect of Silicon Carbide Particle Size on Physical and Mechanical Properties of Hierarchical Layered Composite Material | Participated | G Prasanthi |
| International | N.B.K.R. Institute of Science and Technology | Nellore | 07-Feb-2020 | 09-Feb-2020 | Manufacturing, Microstructural and Mechanical Characterization of Stir Cast Aluminium 7075SiC metal matrix composite | Participated | I chidwilas |
| International | NIT Trichy | NATIONAL INSTITUTE OF TECHNOLOGY TIRUCHIRAPPALLI | 27-Dec-2019 | 28-Dec-2019 | Manufacturing, Microstructural and Mechanical Characterization of Powder Metallurgy Processed Al7075SiC Metal Matrix Composite | Participated | Prasanthi G |
| International | BVRIT NARSAPUR | BVRIT, NARSAPUR | 23-Aug-2019 | 23-Aug-2019 | Experimental Study and Optimization of Machining Parameters While Turning Austenitic Stainless Steel (AISI316) Using ANOVA | Participated | RAMAK KRISHNA AND NAVEEN KUMAR |
| International | GRIET HYDERABAD | GRIET, HYDERABAD | 08-Mar-2019 | 10-Mar-2019 | Synthesis and Mechanical Behaviour of (AlSiC) Functionally Graded Material Using Powder Metallurgy Technique | Participated | venkata nilesh |
| International | Indian Institute of Technology Hyderabad | IIT HYDERABAD | 27-Dec-2017 | 29-Dec-2017 | Influence of Reinforcement Size on Microstructure and Mechanical Properties of Al SiC Functionally Graded Materials | Participated | KONDAL REDDY |
| International | ISTAM | University College of Engineering, Osmania University | 15-Dec-2017 | 18-Dec-2017 | Participated | G. SANTOSH | |
| International | MALLA REDDY COLLEGE OF ENGINEERING AND TECHNOLOGY | MALLA REDDY COLLEGE OF ENGINEERING AND TECHNOLOGY | 26-Dec-2014 | 27-Dec-2014 | A NUMERICAL APPROACH TO ESTIMATE THE TOTAL MANUFACTURING COST FOR ASSEMBLED AND NON ASSEMBLED COMPONENTS | Participated | A. SRIDHAR |
| Title | Type | Organized by | Venue | Start date | End date | Role |
|---|---|---|---|---|---|---|
| ADVANCES IN ENGINE COMBUSTION AND EMISSION DIAGNOSTICS | Faculty development program | NIT Andhra Pradesh | NIT Andhra Pradesh | 05-Oct-2020 | 09-Oct-2020 | Participated |
| Potential research areas in mechanical engineering | Faculty development program | VITS | VITS | 15-Jun-2020 | 20-Jun-2020 | Participated |
| Contemporary Developments in Manufacturing Processes, Sustainable Manufacturing and Industrial Technologies | Faculty development program | pragathi engineering college | Online | 09-Jun-2020 | 13-Jun-2020 | Participated |
| Materials Recent Trends & Engineering Applications | Faculty development program | GRIET | GRIET | 02-Jun-2020 | 07-Jun-2020 | Participated |
| Recent Advances in Material Characterization | Faculty development program | GRIET | NITTR | 23-May-2020 | 28-May-2020 | Participated |
| Artificial Intelligence | Faculty development program | VBEC | VBEC | 22-May-2020 | 26-May-2020 | Participated |
| Faculty Development Programme | Faculty development program | NPTEL | Hyderanad | 31-Jul-2019 | 31-Oct-2019 | Participated |
| NPTEL FDP | Faculty development program | MHRD | ONLINE | 09-Jul-2019 | 09-Oct-2019 | Participated |
| Enhancing English Language Skills | Faculty development program | Department of English GITAM hyderabad | GITAM, HYDERABAD | 27-Jan-2018 | 04-Apr-2018 | Participated |
| MECHANICS OF MATERIALS | Faculty development program | GITAM UNIVERSITY HYDERABAD | GITAM, HYDERABAD | 06-Jun-2016 | 11-Jun-2016 | Participated |
| MECTRAX | Quality improvement program | MECHANICAL DEPARTMENT GITAM HYD | GITAM, HYDERABAD | 19-Mar-2016 | 19-Mar-2016 | Participated |
| EFFICYCLE 2015 PUNJAB | Faculty development program | SAEINDIA NORTHERN SECTION | LOVELY PROFESSIONAL UNIVERSITY, PUNJAB | 15-Oct-2015 | 18-Oct-2015 | Participated |
| EFFICYCLE2015 | Faculty development program | SAEINDIA NORTHERN SECTION | CDGI INDORE | 11-Jul-2015 | 12-Jul-2015 | Participated |
| ORIENTATION PROGRAM ON RESEARCH METHODOLOGY | Faculty development program | JNTU ANANTAPUR | JNTU ANANTAPUR | 15-Jun-2015 | 20-Jun-2015 | Participated |
| Solid & Surface CAD modeling with CAM Applications in CNC Machining | Faculty development program | IIT KHARAGPUR | IIT KHARAGPUR | 09-Feb-2015 | 13-Feb-2015 | Participated |
| ADVANCES IN THERMAL ENGINEERING | Faculty development program | TEQUIPII | CBIT HYDERABAD | 28-Nov-2014 | 29-Nov-2014 | Participated |
| ISTE WORKSHOP ON FLUID MECHANICS | Quality improvement program | IIT KHARAGPUR | GITAM, HYDERABAD | 20-Mar-2014 | 30-Mar-2014 | Participated |
| ISTE WORKSHOP on ENGINEERING MECHANICS | Quality improvement program | IIT BOMBAY | GITAM, HYDERABAD | 26-Nov-2013 | 06-Dec-2013 | Participated |
| Advanced Manufacturing Methods | Quality improvement program | NIT WARANGAL | NIT WARANGAL | 20-Jan-2009 | 20-Jan-2009 | Participated |
| Title | Type | Organized by | Venue | Start date | End date | Role |
|---|