
Eshwaraiah P.
Professor, Mechanical Engineering, GST , HYD
Education
Ph. D.Email ID
Education
Ph. D.Research Areas
- Advanced Manufacturing systems
- Additive Manufacturing
- Computer Aided Process Planning
- CADCAM
Education
Degree Name | Institute & College name | Year of Graduation/Award |
---|---|---|
Some studies on Computer Aided Process Planning | IIT Delhi | 1999 |
M.E | College of Engineering Vishakapatanam | 1993 |
B.Tech | G.Pulla Reddy Engineering College Kurnool | 1991 |
Experience
Designation | Organization | From Date | To Date |
---|---|---|---|
Professor | VJIT (Vignan Bharati Institute of Technology) | 01-02-2013 | 31-05-2013 |
Sr. IT Consultant | eData Experts India Limited | 06-02-2012 | 04-02-2013 |
Project Manager | Infotech Enterprises Limited | 02-11-2009 | 03-02-2012 |
Project Manager | Wipro Technologies | 15-07-2002 | 31-10-2009 |
Project Manager | Infosys Technologies Ltd, | 05-06-2000 | 12-07-2002 |
Project Manager | IIS Scientific Computing Ltd., | 07-09-1998 | 02-06-2000 |
Software Engineer | Infotech Enterprises (P) Ltd., | 08-09-1997 | 04-09-1998 |
A Study on the Development of Aerostructures Design for Assembly Guidelines and Their Effective Use to Proactively Identify Opportunities for Improvement in Mitigating Common Defects of the Aerostructures Assembly SAE Technical Paper, Scopus, JAN-2020, 01, 30-44
Application of Weight, Quality, Cost, Delivery, and Productivity Optimization Techniques as an Aerospace Design for Manufacturing and Assembly Guideline in the Selection of Alternate Aerospace Commercial OfftheShelf ConsumablesSAE Technical Paper, Scopus, JAN-2020, 01, 20-31
A Study on the Development of an Effective Framework for Implementation and Sustenance of an Obsolescence Material Management System in an Aerospace Supplier Manufacturing Industry Environment, SAE Technical PaperSAETechnical paper, Scopus, OCT-2019, 28, 20-32
Enhancement of Design for Manufacturing and Assembly Guidelines for Effective Application in Aerospace Part and Process DesignSAE Technical Paper, Scopus, JAN-2016, 01, 22-36
Experimental Analysis of Single Nozzle Jet Pump with varying Area ratioInternational Journal on Theoretical and applied Research in Mechanical Engineering (IJTARME), Google scholar, -2014, 3, 2319-3182
A Framework for Effective Implementation of Process Failure Modes and Effects Analysis with Control Plans to Mitigate Process, Discrete Manufacturing and Service Industries, Using Aerospace Standard Best PracticesSAE Technical Paper, Others, OCT-2009, 28, 11-20
Board name | Journal name |
---|
Board name | Journal name |
---|---|
JAFM | Journal of Applied Fluid Mechanics |
Seminar name | Organized by | Venue | Start date | End date | Title of the paper presented | Role | Co presenter |
---|---|---|---|---|---|---|---|
National | REC Warangal | REC Warangal | 09-Jan-1997 | 11-Jan-1997 | CAPP for Prismatic Parts Integration of Process Planning with Scheduling | Participated | |
National | CMTI Bangalore | Bangalure | 08-Dec-1994 | 10-Dec-1994 | Concurrent Engineering The state of art | Participated |
Seminar name | Organized by | Venue | Start date | End date | Title of the paper presented | Role | Co presenter |
---|---|---|---|---|---|---|---|
International | NIT Warangal | NIT Warangal | 23-Feb-2017 | 25-Feb-2017 | 3)Experimental Analysis on Drag Coefficient Reduction Techniques | Participated | G Santhosh Kumar |
International | BANGALURE UNIVERSITY | Bangalore | 22-Feb-1996 | 24-Feb-1996 | Feature based Modelling and Petrinet Aided Process Sequencing for CAPP | Participated | |
International | PSG College of Technology | PSG College of Technology | 15-Dec-1994 | 17-Dec-1994 | Automation of coding and classification system in Group Technology | Participated |
Title of the thesis | Name of the student | Name of the college / university | Major subject area | Year of admission | Type of admission | Thesis specification |
---|---|---|---|---|---|---|
High entropy alloys | K KIRAN KUMAR | GITAM HYDERABAD | Composite Materials | Part time | PhD | |
Development of framework Design for Manufacturing and Assembly principles | MANI RATHINAM R | GITAM HYDERABAD | Design for Manufacturing and Assembly | Part time | PhD | |
Properties of functionally graded Ti6Al4vTiC composite fabricated by laser deposition | Mr.Sai Ram Kotari | GITAM HYDERABAD | Composite materials | Part time | PhD | |
Artificial Intelligence in Manufacturing | Ramesh M | GITAM Hyderabad | Advanced Manufacturing Applications | Part time | PhD | |
Analysis of functionally graded carbon nano tube sandwich shells | Sucharitha C | GITAM HYDERABAD | Composite Materials | Part time | PhD | |
Advanced Manufacturing Applications | Bharath Chukkapalli | GITAM HYDERABAD | Advanced Manufacturing Applications | Part time | PhD | |
Characterisation and formability of Bimetallic Sheet Metals | Pavan Kumar J | GITAM HYDERABAD | Composite Materials | Part time | PhD | |
Advanced Manufacturing applications | T.Venkatesh | GITAM HYDERABAD | Advanced Manufacturing applications | Part time | PhD | |
Additive Manufacturing | Y. Muralikrishna | GITAM UNIVERSITY HYDERABAD | Advanced Manufacturing applications | Part time | PhD |
Title of the thesis | Name of the student | Name of the college / university | Major subject area | Year of admission | Type of admission | Thesis specification |
---|
Title of the thesis | Name of the student | Name of the college / university | Major subject area | Year of admission | Type of admission | Thesis specification |
---|
Title | Type | Organized by | Venue | Start date | End date | Role |
---|---|---|---|---|---|---|
Design For Manufacturability (DFM) | Quality improvement program | GITAM Deemed to be University Hyderabad | GITAM Deemed to be University, Hyderabad | 08-Mar-2018 | 10-Mar-2018 | Organized |
3D Printing | Faculty development program | PMMMNMTT, MHRD GoI, and NIT Warangal | NIT Warangal | 05-Jun-2017 | 10-Jun-2017 | Participated |
DXF Product Design Excellence | Quality improvement program | GITAM Deemed to be University, Hyderabad | GITAM Deemed to be University, Hyderabad | 24-Dec-2016 | 24-Dec-2016 | Organized |
Strength of Materials | Faculty development program | Resource person from IIT Chennai | GITAM University | 06-Jun-2016 | 11-Jun-2016 | Organized |
Engineering Mechanics | Faculty development program | IIT Chennai Resource Person | GITAM University | 30-May-2016 | 04-Jun-2016 | Organized |
Technical Communication for Scientists and Engineers | Faculty development program | ISTE certificate course conducted by IIT Bombay | GITAM University, Hyderabad | 08-Oct-2015 | 05-Dec-2015 | Participated |
Fluid Mechanics | Faculty development program | IIT Kharagpur under the National Mission on Education through ICT (MHRD, Govt. Of India) | GITAM University, Hyderabad | 20-May-2014 | 30-Apr-2014 | Participated |
Title | Type | Organized by | Venue | Start date | End date | Role |
---|
Organization name | Membership category | Membership type |
---|---|---|
Society of Automotive Engineers | Individual | Member |
Title of the lecture | Name of the college / university | Place | Date |
---|---|---|---|
Additive Manufacturing | Vishnu Institute of Technology | Bhimavaram | 28-Nov-2015 |
Title | Venue | Organized by | Role | Year |
---|---|---|---|---|
Member Academic Council | GITAM VISHAKAPATANAM | GITAM | National | 2014 |
Member Academic Council | GITAM VISHAKHAPATANAM | GITAM | National | 2015 |
Member Academic Council | GITAM VISHAKHAPATANAM | GITAM | National | 2016 |
Member Academic Council | GITAM VISHAKHAPATANAM | GITAM | National | 2017 |
Member Academic Council | GITAM VISHKHAPATANAM | GITAM | National | 2017 |
Member Academic Council | GITAM VISHAKHAPATANAM | GITAM | National | 2018 |
Member BOS | GITAM VISHAKHAPATANAM | GITAM | National | 2018 |