Faculty Profile
Chinmaya Prasad P.
Associate Professor, Mechanical Engineering, GST , HYD
Education
Ph. D.Email ID
cpadhy@gitam.edu
Education
Ph. D.Research Areas
- Manufacturing Engineering
- Ship Hydrodynamics
- Optimization
Education
| Degree Name | Institute & College name | Year of Graduation/Award |
|---|---|---|
| PhD | Indian Institute of Technology IIT Kharagpur | 2011 |
| MTech | National Institute of Foundry Forge Technology NIFFT Ranchi | 2004 |
| BTech | National Institute of Technology NIT Jamshedpur | 1999 |
Experience
| Designation | Organization | From Date | To Date |
|---|---|---|---|
| Associate Professor | GITAM University | 03-06-2013 | 07-11-2022 |
| Associate Consultant | Wipro Technology | 21-11-2007 | 24-05-2013 |
| Software Engineer | CADopia India Pvt Ltd | 16-04-2007 | 08-11-2007 |
| Senior Research Fellow | Sponsored Research Industrial Consultancy SRIC IIT Kharagpur | 07-06-2004 | 10-04-2007 |
| Lecturer | MSE Baripada | 21-02-2000 | 14-12-2001 |
Awards
| Award name | Award Organization | Awarded year |
|---|---|---|
| Teachers Associateship for Research Excellence (TARE) Fellowship | SERB-DST, Govt of India | 2020 |
| Feather in Cap | Wipro Technologies, India | 2008 |
Aerodynamic and Experimental Analysis of Biomimiccorrugated dragonfly aerofoilINCAS BULLETIN, Scopus, JUN-2020, 12, 73-85
Influence of Aerodynamic Parameters on Dragonfly Inspired Corrugated AerofoilAdvances in Fluid Dynamics , Scopus, JUL-2020, X, 289-304
A case study of wind turbine loads and performance using steadystate analysis of BEMInternational Journal of Sustainable Energy, Scopus, JUL-2020, X, 1-18
Lathe Parameters Optimization for UDGFRP CompositePart Turning with PCD Tool by Taguchi MethodINCAS BULLETIN, Scopus, DEC-2020, 12, 135-144
Evaluation of Tool Wear Characteristics duringMachining NiBased Superalloy (Inconel 625)Under Different Lubricating ConditionsTribology in industry, Scopus, DEC-2020, 42, 692-708
Use of MultiObjective Optimization Technique (TaguchiGRA Approach) in Dry Hard Turning of Inconel 625INCAS BULLETIN, Scopus, JUN-2020, 12, 133-142
Aerodynamic and structural analysis of biomimetic corrugated wingFluid Mechanics Research International Journal, Web of science, JUN-2019, 3, 61-67
Study on the Rheological Properties of HBN Nano Cutting Fluid in MQL Machining of Inconel 625Journal on Material Science, Citeseer, -2019, 6, 59-66
Aerodynamic and structural analysis of biomimeticcorrugated wingFluid Mechanics Research International Journal, Web of science, -2019, 3, 61-67
Tribological Effects of HBn Nano Cutting Fluid Minimum Quantity Lubrication (NfMql) on Machining Inconel 625International Journal of Innovative Technology and Exploring Engineering , Scopus, NOV-2019, 9, 2306-2315
Experimental Analysis of Blended Wing Body Model Micro Air Vehicle Using Wind TunnelEPRA International Journal of Research and Development, Web of science, NOV-2019, 4, 126-135
Effects of the Tribological Behaviour of hBN MQL NanoCutting Fluid (NCFMQL) on Turning Inconel 625INCAS BULLETIN, Scopus, DEC-2019, 11, 107-21
Influence of nano (h BN) cutting fluid on machinability of Inconel 625Journal of Physics Conference Series, Scopus, DEC-2019, 1355, 1-7
Computational Analysis of BioInspired Corrugated Airfoil with VaryingCorrugation AngleJournal of Aeronautics & Aerospace Engineering , Web of science, -2018, 7, 1-4
An Experimental Investigation on Tribological Behavior of Boron Nitride (BN) NanoCutting Fluid for Enhancement of Machining Parameters with Minimum Quantity Lubrication (MQL)Indian Society of Heat and Mass Transfer (ISHMT), Google scholar, JUN-2017, 52, 1727-1734
Optimum ship routing for the north Indian ocean region A decision support systemDiscovery, Others, MAR-2016, 52, 627-634
Is MQL an efficient and sustainable option? AReview International Journal of Scientific & Engineering Research, Citeseer, JUN-2016, 7, 177-181
Inner harbour wave agitation using boussinesq wave modelInternational Journal of Naval Architecture and Ocean Engineering, Scopus, -2015, 7, 70-86
An approach for development of a ship routing algorithm for application in the North Indian Ocean regionApplied Ocean Research, Scopus, -2015, 50, 173-191
Optimal Ship Tracking On a Navigation Route Between Two Ports a hydrodynamics approach.International Journal of Marine Science Technology, Scopus, -2012, 17, 59-67
Nearshore propagation of cyclonic wavesInternational Journal of Natural Hazards., Scopus, -2012, 60, 605-622
Development of ship weather routing algorithm and its application for Indian Coastal Sea RoutesInternational Journal of Ecology and Development. , Web of science, -2009, 12, 59-74
Application of ShipWeather Routing for the North Indian Ocean.International Journal of Natural Hazards., Scopus, -2008, 44, 373-385
| Title of the project | Funded by | Duration | Sanctioned date |
|---|---|---|---|
| Development of a Pellet Based Material Extrusion 3D Printer for HighPerformance Polymers | SERB, DST, GoI | 36 | 07-Dec-2020 |
| Title of the project | Funded by | Duration | Sanctioned date |
|---|
| Title of the book | Book / Chapter | Name of the publisher | Subject area | Edition | Page numbers | ISBN | Published year |
|---|---|---|---|---|---|---|---|
| Ship Route Optimization An Advanced decision support system | Book | LAMBERT | Vehicle Route Optimization | Second | 9783847373766 | 2012 | |
| Maritime Engineering and Technology | Chapters | Taylor & Francis Group( CRC Press) | Marine Engineering | 1 | 25-35 | 9780429216961 | 2012 |
| Board name | Journal name |
|---|---|
| Editorial Board Member | JME |
| Board name | Journal name |
|---|---|
| Review Board member | IJMMME |
| Seminar name | Organized by | Venue | Start date | End date | Title of the paper presented | Role | Co presenter |
|---|---|---|---|---|---|---|---|
| National | Dept of Chemical Engineering,CBIT | CBIT Hyderabad | 22-Mar-2019 | 23-Mar-2019 | Optimum Ship routing for the north Indian Ocean Region A decision support system | Participated | NA |
| National | Vasavi College of Engineering, Hyderabad | Vasavi College of Engineering, Hyderabad | 07-Dec-2018 | 08-Dec-2018 | Study on the Rheological properties of hBN nanocutting fluid in MQL machining of Inconel 625 | Participated | NA |
| National | CBIT Hyderabad | Dept of Mechanical Engg., CBIT, Hyderabad | 05-Oct-2017 | 06-Oct-2017 | NA | Participated | NA |
| National | Vasavi College of Engineering, Hyderabad | Vasavi College of Engineering, Hyderabad | 10-Mar-2017 | 11-Mar-2017 | Growth of crystals in the Fusion Zone (FZ) of a weld pool Reasons for Affecting Mechanical Properties of Metals | Participated | NA |
| National | Dept of Mechanical and Management Studies,CBIT | CBIT Hyderabad | 28-Jan-2016 | 29-Jan-2016 | Optimum Ship routing for the north Indian Ocean Region A decision support system | Participated | NA |
| National | Jadavpur University Kolkata | Jadavpur University Kolkata | 19-May-2010 | 21-May-2010 | Application of wave modeling for the ship weather routing problem | Participated | |
| National | Andhra Univ | Andhra Univ | 18-Dec-2006 | 21-Dec-2006 | Optimum ship weather routing an advanced decision support system | Participated |
| Seminar name | Organized by | Venue | Start date | End date | Title of the paper presented | Role | Co presenter |
|---|---|---|---|---|---|---|---|
| International | Petroleum University, Gandhinagar | Gandhinagar | 23-Feb-2019 | 26-Feb-2019 | Aerodynamic and Structural analysis of biomimetic corrugated wing | Participated | |
| International | VIT Vellore | VIT Vellore | 13-Dec-2018 | 15-Dec-2018 | Influence of Angle of Attack on the aerodynamic performance of dragonfly inspired corrugated aerofoil | Participated | |
| International | IIT Hyderabad | BITS Hyderabad | 27-Dec-2017 | 30-Dec-2017 | An Experimental Investigation on Tribological Behavior of Boron Nitride (BN) NanoCutting Fluid for Enhancement of Machining Parameters with Minimum Quantity Lubrication (MQL) | Participated | Pariniti Singh |
| International | Osmania Univ | Osmania Univ | 08-Dec-2016 | 10-Dec-2016 | A Review on Nano Structured Boron Nitride Syntheses, explicit Properties and identifying its Potential application as Nano Fluid in Minimum Quantity Lubrication | Participated | |
| International | NIOT Chennai | NIOT Chennai | 22-Jun-2011 | 24-Jun-2011 | Development of a ship routing algorithm and its application to the North Indian Ocean Region | Participated | |
| International | University of Lisbon | Lisbon, Portugal | 10-May-2011 | 12-May-2011 | An Algorithm for MinimumTime Ship Routing for the North Indian Ocean Region | Participated | |
| International | BUET Dhaka | BUET, Dhaka | 10-Dec-2010 | 12-Dec-2010 | Development of a Ship WeatherRouting Algorithm for Specific Application in North Indian Ocean | Participated | |
| International | NIT Suratkal | NIT Suratkal | 26-Dec-2007 | 29-Dec-2007 | Application of satellite generated wave data for ship weather routing in north Indian Ocean region | Participated | |
| International | IIT Delhi | IIT Delhi | 14-Feb-2006 | 17-Feb-2006 | Wave Modeling for the North Indian Ocean and its Application for Weather Routing of Ships | Participated |
| Title of the thesis | Name of the student | Name of the college / university | Major subject area | Year of admission | Type of admission | Thesis specification |
|---|---|---|---|---|---|---|
| Aerodynamic and Structural analysis of biomimetic corrugated wing | Akhtar Khan | GITAM | Aerodynamics | 2017 | Part time | PhD |
| Machinability study of GFRP under varying conditions | Hazari Naresh | GITAM | Manufacturing | 2017 | Part time | PhD |
| Some topic in additive manufacturing | S Swetha | GITAM | Additive Manufacturing | 2017 | Part time | PhD |
| Investigation of machining characterstics of Inconel 625 under MQL cutting condition | Pariniti Singh | GITAM | Manufacturing | 2015 | Full time | PhD |
| Title of the thesis | Name of the student | Name of the college / university | Major subject area | Year of admission | Type of admission | Thesis specification |
|---|
| Title of the thesis | Name of the student | Name of the college / university | Major subject area | Year of admission | Type of admission | Thesis specification |
|---|
| Name of the award | Awarded by | Awarded year |
|---|---|---|
| Reviewer | JME | 2019 |
| Title | Type | Organized by | Venue | Start date | End date | Role |
|---|---|---|---|---|---|---|
| Tactical Missile Propulsion | Quality improvement program | AR & DB (Propulsion Panel) | IIT Hyderabad | 22-Oct-2019 | 23-Oct-2019 | Participated |
| R Programming Concepts and Applications for Teachers in Higher Education | Faculty development program | NIT Warangal | Dept of Civil Engg, NIT Warangal | 13-Sep-2017 | 17-Sep-2017 | Participated |
| NWCIM 2017 | Quality improvement program | KIIT Bhubaneswar | Dept of Mathematics, KIIT Bhbubaneswar | 16-May-2017 | 21-May-2017 | Participated |
| Advancements in MEMS and NEMS Technolgies | Faculty development program | Dept of Mechanical Engineering, GRIET,Hyderabad | Dept of Mechanical Engg., GRIET,Hyderabad | 19-Nov-2015 | 21-Nov-2015 | Participated |
| Fluid Mechanics | Quality improvement program | IIT Kharagpur | National Mission on Education through ICT (MHRD) | 20-May-2014 | 30-May-2014 | Participated |
| Title | Type | Organized by | Venue | Start date | End date | Role |
|---|---|---|---|---|---|---|
| GIAN Course, Dislocation Theory for Mechanical Behaviour of Metals | Quality improvement program | IIT Hyderabad | Dept of Material Sc. and Metallurgical Engg., IIT Hyderabad | 12-Dec-2016 | 16-Dec-2016 | Participated |
| Organization name | Membership category | Membership type |
|---|---|---|
| Indian Science Congress Association | Life | Member |